Protect your pool area, backyard and side access — any motion at the pool gate or back fence triggers a bark alert inside the house. No Wi-Fi, no subscription and no installation.
If you are looking for a pool area alarm or backyard security alert, K9-Alert's wireless outdoor sensor triggers a sound inside your home the moment anyone enters the pool area or backyard — day or night, without needing a Wi-Fi connection.
Most home alarms protect the front door, the garage, and sometimes the back door. The pool gate, side fence gate, and backyard perimeter are frequently unmonitored — but they are often the entry route for uninvited visitors and after-hours intruders.
A side gate that opens to the backyard and pool area is a common entry route precisely because it is out of sight from the street and typically unalarmed. A motion sensor at the gate changes that immediately.
The wireless sensor communicates with the receiver up to 100 m away — inside the house. No wiring between outdoors and indoors. The sensor mounts temporarily with no permanent fixtures.
Unlike a phone app notification (which depends on Wi-Fi and you having your phone nearby), the bark alert sounds in the house itself — heard from any room.
One receiver in the house. Sensors at each outdoor entry point. All sensors feed the same receiver — the bark alert inside the house is the same regardless of which sensor triggers.
Sensor pointed at or just inside the pool gate. Any entry to the pool area triggers the bark alert inside the house immediately.
Cover the side access gate — the most common non-front-door entry route. A second sensor paired to the same receiver.
For properties where the rear boundary is accessible, position a sensor to cover any approach along the fence line or through the rear access.
Protect the BBQ area, outdoor furniture, and any items stored on the back patio with a sensor covering that zone.
App-based cameras need Wi-Fi and your phone nearby. K9-Alert's bark alert sounds inside the house itself.
| Concern | Smart camera / app alarm | K9-Alert |
|---|---|---|
| Alert when phone is elsewhere | No alert if phone is away or muted | Bark sounds in house regardless of phone location |
| No Wi-Fi in backyard | Camera may not connect reliably | Works entirely offline — radio frequency link |
| Installation at pool gate | Camera requires bracket, power and Wi-Fi | Sensor mounts temporarily — no power, no wiring |
| Deterrent vs notification | Notification only — after motion detected | Bark deters approach — occupancy cue at the gate |
Yes. Position the wireless sensor at the pool gate — when motion is detected, the receiver inside the house triggers the bark alert. The sensor works outdoors and communicates wirelessly up to approximately 100 m from the receiver.
No. Australian pool fencing laws (AS 1926) require a compliant self-closing, self-latching pool barrier. A motion alarm is an additional security layer — always ensure your pool barrier meets local council and state requirements first.
Yes. K9-Alert's sensor communicates with the receiver via direct radio frequency — no Wi-Fi or internet required. The sensor can be outdoors at the pool gate and the receiver inside the house will alert when motion is detected.
Yes. K9-Alert supports multiple sensors — one at the pool gate and one at the side gate both pair to the same receiver. Either sensor triggers the bark alert inside the house.
